Australia-wide coverage

Anchor Testing Across Australia

We are based in Brisbane and mobilise nationally. Every state and territory in Australia is covered by our anchor testing programme, with the appropriate professional engineering registration for each jurisdiction.

20 locations
RPEQ, RPE NSW, RPEng Vic registered

How a pull test is booked

  • Sydney, New South Wales. The quote measures the drive from the Allied Commercial office in Alexandria, 146 McEvoy Street. Testing crew flies in from Brisbane.
  • Melbourne, Victoria. The quote measures the drive from the Allied Commercial office in Port Melbourne, 7/345 Plummer Street. Crew flies in from Brisbane.
  • South Australia (Adelaide), Western Australia (Perth), ACT (Canberra), Tasmania (Hobart) and the Northern Territory (Darwin). The quote measures the drive from that city centre. Crew flies in from Brisbane.

Book a pull test when an engineer has specified the test and the anchors can be batched on one visit. A single annual roof-anchor tag is usually a local installer. ATA does not install anchors. Travel on the quote is $200 per hour for the return drive from that start point.

Queensland (QLD)

Brisbane

Southeast Queensland, Queensland

Independent proof load and ultimate load testing for post-installed anchors across Brisbane. AS 5216 compliant, NATA-calibrated equipment, draft reports within 48 hours.

Same-day or next-day. ATA is based in Brisbane.

Gold Coast

Southeast Queensland, Queensland

Proof load and ultimate load testing for post-installed anchors across the Gold Coast. Coastal construction expertise, RPEQ-certified reports.

Next-day from Brisbane base. 1 to 1.5 hour drive.

Sunshine Coast

Southeast Queensland, Queensland

Independent anchor testing services for the Sunshine Coast region. Proof load, ultimate load, and displacement monitoring with RPEQ-certified reporting.

Next-day from Brisbane. 1 to 1.5 hour drive.

Townsville

North Queensland, Queensland

Anchor proof load and ultimate load testing in Townsville and North Queensland. RPEQ-certified reports for mining, defence, and commercial construction.

Fly-in from Brisbane. 1 to 2 weeks lead time typical.

Cairns

Far North Queensland, Queensland

Post-installed anchor testing in Cairns and Far North Queensland. Cyclone-rated connections, marine structures, and commercial construction.

Fly-in from Brisbane. 1 to 2 weeks lead time typical.

Ipswich

Southeast Queensland, Queensland

Anchor testing for Ipswich and western Brisbane corridor. Proof load testing for residential, commercial, and defence construction.

Same-day or next-day from Brisbane. 40 minute drive.

Toowoomba

Darling Downs, Queensland

Independent anchor proof load and ultimate load testing for Toowoomba and the Darling Downs. RPEQ-certified reports, NATA-calibrated equipment, mobilised from our Brisbane base.

Next-day from Brisbane. 1.5 to 2 hour drive.

Mackay

Mackay Region, Queensland

Anchor proof load and ultimate load testing in Mackay and the surrounding region. RPEQ-certified reports for mining services, port, and commercial construction.

Fly-in from Brisbane. 1 to 2 weeks lead time typical.

Rockhampton

Central Queensland, Queensland

Anchor proof load and ultimate load testing in Rockhampton and Central Queensland. RPEQ-certified reports for commercial, agricultural, and industrial construction.

Fly-in from Brisbane. 1 to 2 weeks lead time typical.
New South Wales (NSW)

Sydney

Greater Sydney, New South Wales

For anchor testing sydney, this page is for the engineer who has specified a proof load, pull test, or commissioning test and has enough anchors to batch. A single annual roof-anchor tag is usually a local installer job. ATA does not install anchors. Testing is AS 5216 compliant, with reports certified by an RPE NSW registered engineer. The crew flies in from Brisbane. The return drive is quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria, at $200 per hour.

Crew flies in from Brisbane. Drive quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria. 3 to 5 business days typical.

Newcastle

Hunter Region, New South Wales

For anchor testing newcastle, this page is for the engineer who has specified a proof load, pull test, or commissioning test on industrial, port, or heritage connections, with enough anchors to batch. A single annual roof-anchor tag is usually a local installer job. ATA does not install anchors. Reports are signed by an RPE NSW registered engineer. The crew flies in from Brisbane. The return drive is quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria, at $200 per hour.

Crew flies in from Brisbane. Drive quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria. 3 to 7 business days.

Wollongong

Illawarra, New South Wales

For anchor testing wollongong, this page is for the engineer who has specified a proof load, pull test, or commissioning test in steel, concrete, or masonry, with enough anchors to batch. A single annual roof-anchor tag is usually a local installer job. ATA does not install anchors. Reports are signed by an RPE NSW registered engineer. The crew flies in from Brisbane. The return drive is quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria, at $200 per hour.

Often combined with a Sydney visit. Crew flies in from Brisbane. Drive quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria. 3 to 7 business days.

Central Coast

Central Coast, New South Wales

For anchor testing central coast, this page is for the engineer who has specified a proof load, pull test, or commissioning test and has enough anchors to batch. A single annual roof-anchor tag is usually a local installer job. ATA does not install anchors. Reports are signed by an RPE NSW registered engineer. The crew flies in from Brisbane. The return drive is quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria, at $200 per hour.

Often combined with a Sydney or Newcastle visit. Crew flies in from Brisbane. Drive quoted from the Allied Commercial office at 146 McEvoy Street, Alexandria. 3 to 7 business days.

Need anchor testing anywhere in Australia?

Send us your test specification and site location. We will confirm mobilisation timing, the appropriate professional registration for your state, and provide a scope within 24 hours.

Send Test Brief